Last updated by at .

  • Hyper-V 2016
    What's new in Hyper-V 2016
  • Microsoft Azure
    Microsoft Azure

Tag: BIOS

diskpart fat32 and gpt

How to create Windows Windows Server bootable USB media for deployment on UEFI based systems

When you were create a USB media for PCs, notebooks and servers which were using BIOS you could use several tools to do this. Now most of the tools do not really create a USB media drive which can be used to boot and install Windows or Windows Server on a UEFI based system such a new servers and for example the Surface Pro line. But it is very simple to do this now, just follow this steps:

  • The USB drive has to be formatted in FAT32
  • The USB needs to be GPT and not MBR
  • Copy all files from the ISO to the USB drive

diskpart fat32 and gpt

This is it, and here is how you do it:

First plugin your USB drive to your computer. The USB drive should be bigger than 4GB.

Open a CMD prompt or PowerShell using the Run as Administrator option and open diskpart. Now you can do list all this by using

Select the USB disk, in my case this was disk 1

Clean the disk. Be careful this will remove all files and partitions on the USB media.

Now convert it to GPT

Create a new primary partition. But make sure the partition is not greater than 16GB otherwise it can be formatted with FAT32.

Format the partition with FAT32

Assign a drive letter to the volume

now you can exit the diskpart and copy all files from the Windows or Windows Server to the USB drive and boot it. This works with Windows 8, Windows 8.1, Windows 10, Windows Server 2012, Windows Server 2012 R2 and Windows Server 2016 or even Hyper-V Server in the same editions.

 



Cisco C200 M2 SR-IOV for Hyper-V

In my lab I am using three Cisco C200 M2 rack mount server for my Windows Server 2012 Hyper-V hosts. Windows Server 2012 Hyper-V brings support for SR-IOV which didn’t really work on my C200 M2 servers. Today I updated my Cisco servers to the latest firmware Release 1.4(3p).

After the update I checked the BIOS settings and found a new setting which allows to enable SR-IOV.

SR-IOV Cisco C200 M2

It’s great to see that vendors are bring support for the new features which are supported in Windows Server 2012.