Slipstream SQL Server 2008 SP2 for SCCM 2012

Posted on December 3, 2011 by Thomas Maurer

The Release Candidate version of System Center Configuration Manager 2012 requires MS SQL Server 2008 SP2 with Cumulative update package 6. Now this can be a little annoying and will hopefully change to SQL Server 2008 R2 in the RTM version.

Now if you want to install MS SQL Server 2008 on a Windows Server 2008 R2 you need at least a install media with SP1. Now this post shows you how you can integrate Service Pack 2 into the install media of SQL Server 2008.

Copy the SQL Server 2008 install media to C:\SQLServer2008withSP2
Download and copy the SQL Server 2008 Service Pack 2 files to C:\temp

Now you can run the following commands:

SQLServer2008SP2-KB2285068-IA64-ENU.exe /x:c:\SQLServer2008withSP2\PCU
SQLServer2008SP2-KB2285068-x64-ENU.exe /x:c:\SQLServer2008withSP2\PCU
SQLServer2008SP2-KB2285068-x86-ENU.exe /x:c:\SQLServer2008withSP2\PCUrobocopy C:\SQLServer2008withSP2\PCU c:\SQLServer2008withSP2 Setup.exe
robocopy C:\SQLServer2008withSP2\PCU c:\SQLServer2008withSP2 Setup.rll
robocopy C:\SQLServer2008withSP2\pcu\x86 C:\SQLServer2008withSP2\x86 /XF Microsoft.SQL.Chainer.PackageData.dll
robocopy C:\SQLServer2008withSP2\pcu\x64 C:\SQLServer2008withSP2\x64 /XF Microsoft.SQL.Chainer.PackageData.dll
robocopy C:\SQLServer2008withSP2\pcu\ia64 C:\SQLServer2008withSP2\ia64 /XF Microsoft.SQL.Chainer.PackageData.dllecho PCUSOURCE="C:\SQLServer2008withSP2\PCU" >> C:\SQLServer2008withSP2\x86\DefaultSetup.ini
echo PCUSOURCE="C:\SQLServer2008withSP2\PCU" >> C:\SQLServer2008withSP2\x64\DefaultSetup.ini
echo PCUSOURCE="C:\SQLServer2008withSP2\PCU" >> C:\SQLServer2008withSP2\ia64\DefaultSetup.ini

After you have done this you can install the MS SQL Server
After you have installed it, you still need to download and install the Cumulative update package 6 for SQL Server 2008 Service Pack 2

More about SQL Slipstreaming on Peter Saddow’s MSDN blog post.

Cisco UCS C200 M2 – Cisco Integrated Management Controller (CIMC)

Posted on November 30, 2011 by Thomas Maurer

The first things I tried with the new Cisco UCS C200 M2 servers was the CIMC (Cisco Integrated Management Controller). CIMC is the remote out-of-band management solution (IPMI) provided with Cisco servers, it’s basically the same like HP iLO or Dell DRAC.

One of the biggest advantages is that CIMC is included for free, so there is no extra license you need for extra features like KVM or stuff like that.

After working some hours with the CIMC I was really happy, no problems at all everything worked as expected. From the design it’s like the Cisco UCS Manager but better . I think it is much easier to use and much faster (it’s not Java).

Keyfeatures

Web based front-end
KVM and Virtual media
Change BIOS Settings
Active Directory connector
SNMP
IPMI (Very interesting with the Bare-metal deployment in SCVMM 2012)
SSH
Health Monitoring

Continue reading →

Cisco UCS C200 M2 – Hardware

Posted on November 29, 2011 by Thomas Maurer

Today my two new virtualization nodes from Cisco arrived. For my Microsoft Hyper-V lab I needed two new nodes and I got a really good offering for two Cisco UCS C200 M2 High-Density Rack-Mount Servers.

The whole Cisco server series is optimized for virtualization and offers very cool features like a buildiin Cisco Integrated Management Controller (without extra charge) and Ciscos Extended Memory Technology which allows to use up to 192GB RAM.

Technical Specs

The Cisco UCS C200 M2 server is a high-density, 2-socket, 1 rack unit (RU) rack-mount server built for production-level network infrastructure, web services, and mainstream data center, branch, and remote-office applications.

Up to two Intel Xeon 5500 or 5600 Series multicore processors
Up to 192GB of industry-standard double data rate (DDR3) main memory
Up to eight 2.5-inch or four 3.5-inch internal SAS or SATA disk drives; up to 8 terabytes (TB) total
Built-in RAID 0 and 1 support for up to four or eight SATA drives; RAID 0 and 1 support for up to four or eight SAS or SATA drives with optional mezzanine card; and RAID 0, 1, 5, 6, 10 support for four SAS or SATA drives and RAID 0, 1, 5, 6, 10, 50 and 60 support for eight SAS or SATA drives with optional LSI MegaRAID card
Two half length Gen 2 PCIe slots-one full height x16 and one low profile x8 PCI Express-two integrated Gb Ethernet ports, and one 10/100 Mbps Ethernet management port for accessing the controller
Front- and back-panel interface with video, two USB, and serial port connections

More Information on Cisco.com

Hardware

The Hardware makes a really good first impression.

One of my next posts will be about the CIMC (Cisco Integrated Management Controller) which I really started to like.

Building a new Hyper-V Private Cloud Lab

Posted on November 28, 2011 by Thomas Maurer

Two years ago I created my first real IT Lab with some HP ProLiant ML110 G5. I used this in the past years to test new products and projects. The Lab at this time was very limited, no storage, no cluster, not much RAM and weak CPU performance. Not much help if you work a lot with Hyper-V Clusters and System Center products.

I was looking around for some time now to find a cheap offer for new servers. In the last week I found a offer from Cisco with c200 M2 servers and I couldn’t resist to buy two of the for my Hyper-V Cluster nodes. The offer was a special deal which was even cheaper than building the servers by my own, at this point thanks to my former employer Atlantis Informatik AG.

Now what I will do is creating a new Hyper-V Cluster friendly environment with two Cisco C200 M2 Hyper-V nodes, one HP ML110 G5 as Storage Server and one of my old HP ML110 G5 servers as Hyper-V Server which all my Management servers and Active Directory will run on.

If you want to know more about Hardware you can use for a Hyper-V Lab I recommend the posts of Carsten Rachfahl on hyper-v-server.de (german).

Hardware Configuration

Hyper-V nodes:

2x Cisco C200 M2 - Intel Xeon 5620 2.4GHz Quad Core, 16GB RAM, Remote Management, IPMI, 6 Networkports

Storage Server:

1x HP ProLiant ML110 G5 – Intel Xeon E3110 3.0 GHz Dual Core, 8GB RAM, 4x 500GB Raid 10, 3 Networkports

Management Hyper-V node:

1x HP ProLiant ML110 G5 – Intel Xeon E3110 3.0 GHz Dual Core, 8GB RAM

My first year with Windows Phone

Posted on November 26, 2011 by Thomas Maurer

WinodwsPhoneMangoLogo

Exactly one year ago I got my first Windows Phone. Since then a lot has change and Windows Phone has really improved.

After the first update, called NoDo, I could leave my iPhone 4 behind and change to the HTC 7 Trophy. Of course the hardware was nowhere near the iPhone 4 but the Windows Phone OS was just great. Now one year later there is a lot of good Windows Phone hardware out there and the Windows Phone OS has improved with Mango.

I am sure there will be a lot more great Windows Phone stuff in the future.

PowerShell 3.0: Show-Command

Posted on November 18, 2011 by Thomas Maurer

Just a simple note about a new cmdlet in PowerShell 3.0. Show-Command is something very useful if you try out a new PowerShell Command. It shows all the options and possible parameters you have with the cmdlet.

Show-Command Get-Childitem

Thomas Maurer ™

Just another private cloud weblog

Category Archives: IT